Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.

Nyatakan jenis, tahun dan model untuk mencari roda yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
±
±

2023 Neta X Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan Neta X 2023

Neta
Sila pilih pengubahsuaian kenderaan Neta X 2023 di bawah dan lihat jadual untuk mendapatkan saiz roda, saiz tayar, corak bolt (PCD), ofset rim dan parameter kepadanan tayar yang lain. Jika perlu, anda boleh menapisnya mengikut kawasan pengedaran jualan.

Neta X 2023 .. 2025

Generasi
Tapis mengikut kawasan:
China CHDM
Amerika Tengah & Selatan LADM
Malaysia (Asia Tenggara) SAM

2023 Neta X 2023 .. 2025 - Pengubahsuaian

Electric:
EV 161hp

Neta X 2023 .. 2025 EV

161 hp
LADM CHDM
  • Generasi: 2023 .. 2025
  • Pengeluaran: [2023 .. 2024]
  • Kawasan jualan: Amerika Tengah & Selatan, China, Malaysia (Asia Tenggara)
  • Kuasa: 161 hp | 120 kW | 163 PS
  • Enjin: Electric
  • Tahap Trim: 400, 500, 400 Lite, 500 Lite, 400 Air, 500 Luxury
  • Gerek Tengah / Geret Pusat:
    tidak diketahui
  • Corak Bolt (PCD):
    tidak diketahui
  • Pengikat Roda:
    tidak diketahui
  • Saiz Bebenang:
    tidak diketahui
  • Pengetatan Tork Roda:
    tidak diketahui
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 225/65R17 Bantu lengkapkan maklumat ini 11.7 25.9
OE 225/60R18 100H 6.5Jx18
ET - tidak diketahui
11.7 25.7 2.2 32

Lihat maklumat kepadanan roda Neta X untuk tahun model lain:
2024 2023
Kemas kini halaman: 22/04/2024 06:21
Glosari Tayar
Istilah tayar yang anda boleh lihat di halaman ini

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed