Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.
2017 Kia KX3 Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan Kia KX3 2017
2017 Kia KX3 I (KC) Facelift [2017 .. 2020] - Pengubahsuaian
Kia KX3 I (KC) Facelift [2017 .. 2020] 1.6 MPi
123 hp- Generasi: I (KC) Facelift [2017 .. 2020] [CHDM]
- Pengeluaran: [2017 .. 2020]
-
Kawasan jualan: CHDM
-
Kuasa: 123 hp | 92 kW | 125 PS
- Enjin: 1.6L, , Petrol
-
Gerek Tengah / Geret Pusat:
-
Corak Bolt (PCD): ( )
-
Pengikat Roda: Lug nuts
-
Saiz Bebenang:
-
Pengetatan Tork Roda:
| Tayar | Rim | Julat Ofset mm | Undur Ruang mm inci | Berat Tayar kg lb |
bar psi
|
||
|---|---|---|---|---|---|---|---|
| OE 205/65R16 95H | 6Jx16 ET43 | 41 - 45 | 132 5.20 | 25.2 55.5 | 2.3 33 |
OE
|
|
| 215/60R17 96H | 6.5Jx17 ET49 | 47 - 51 | 144 5.67 | 26.1 57.5 | 2.3 33 |
|
|
| 215/50R18 93V | 6.5Jx18 ET49 | 144 5.67 | 24.0 53.0 | 2.5 36 |
|
Kia KX3 I (KC) Facelift [2017 .. 2020] 1.6 T-GDi
158 hp- Generasi: I (KC) Facelift [2017 .. 2020] [CHDM]
- Pengeluaran: [2017 .. 2020]
-
Kawasan jualan: CHDM
-
Kuasa: 158 hp | 118 kW | 160 PS
- Enjin: 1.6L, , Petrol
-
Gerek Tengah / Geret Pusat:
-
Corak Bolt (PCD): ( )
-
Pengikat Roda: Lug nuts
-
Saiz Bebenang:
-
Pengetatan Tork Roda:
| Tayar | Rim | Julat Ofset mm | Undur Ruang mm inci | Berat Tayar kg lb |
bar psi
|
||
|---|---|---|---|---|---|---|---|
| OE 215/60R17 96H | 6.5Jx17 ET49 | 47 - 51 | 144 5.67 | 26.1 57.5 | 2.3 33 |
OE
|
|
| 215/50R18 93V | 7Jx18 ET49 | 151 5.94 | 24.0 53.0 | 2.5 36 |
|
||
| 225/50R18 95V | 7Jx18 ET49 | 151 5.94 | 25.4 55.9 | 2.5 36 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.