Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.

Nyatakan jenis, tahun dan model untuk mencari roda yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
±
±

2020 MG RX8 Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan MG RX8 2020

MG
Sila pilih pengubahsuaian kenderaan MG RX8 2020 di bawah dan lihat jadual untuk mendapatkan saiz roda, saiz tayar, corak bolt (PCD), ofset rim dan parameter kepadanan tayar yang lain. Jika perlu, anda boleh menapisnya mengikut kawasan pengedaran jualan.

MG RX8 IS21 [2020 .. 2024]

Generasi
Tapis mengikut kawasan:
Timur Tengah MEDM

2020 MG RX8 IS21 [2020 .. 2024] - Pengubahsuaian

MG RX8 IS21 [2020 .. 2024] 2.0T

217 hp
MEDM
  • Generasi: IS21 [2020 .. 2024]
  • Pengeluaran: [2020 .. 2021]
  • Kawasan jualan: Timur Tengah
  • Kuasa: 217 hp | 162 kW | 220 PS
  • Enjin: 2.0L, , Petrol
  • Gerek Tengah / Geret Pusat:
    tidak diketahui
  • Corak Bolt (PCD):
    tidak diketahui
  • Pengikat Roda:
    tidak diketahui
  • Saiz Bebenang:
    tidak diketahui
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 255/60HR18 7.5Jx18
ET - tidak diketahui
15.5 34.1 2.1 30
255/55HR19 7.5Jx19
ET - tidak diketahui
15.1 33.4 2.1 30
255/50VR20 8Jx20
ET - tidak diketahui
14.7 32.3 2.1 30

Lihat maklumat kepadanan roda MG RX8 untuk tahun model lain:
2023 2022 2021 2020
Kemas kini halaman: July 5, 2022, 9:34 a.m.
Glosari Tayar
Istilah tayar yang anda boleh lihat di halaman ini

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.