Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.

Nyatakan jenis, tahun dan model untuk mencari roda yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
±
±

2005 Isuzu KB Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan Isuzu KB 2005

Isuzu
Sila pilih pengubahsuaian kenderaan Isuzu KB 2005 di bawah dan lihat jadual untuk mendapatkan saiz roda, saiz tayar, corak bolt (PCD), ofset rim dan parameter kepadanan tayar yang lain. Jika perlu, anda boleh menapisnya mengikut kawasan pengedaran jualan.

Isuzu KB DH [2002 .. 2010]

Generasi
Tapis mengikut kawasan:
Afrika Selatan SADM

2005 Isuzu KB DH [2002 .. 2010] - Pengubahsuaian

Isuzu KB DH [2002 .. 2010] All trims

SADM
  • Generasi: DH [2002 .. 2010]
  • Pengeluaran: [2002 .. 2010]
  • Kawasan jualan: Afrika Selatan
  • Kuasa:
    tidak diketahui
  • Enjin: , Diesel
  • Gerek Tengah / Geret Pusat:
  • Corak Bolt (PCD): ()
  • Pengikat Roda: Kacang lug
  • Saiz Bebenang:
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 205R15 110S 6JJx15 ET35 33 - 37 124 4.88 1.8 26
OE 225/75R15 108S 6.5JJx15 ET35 33 - 37 130 5.12 13.9 30.7 1.9 28
235/75R15 108S 7JJx15 ET38 140 5.51 14.6 32.3 1.9 28
245/70R16 108T 7JJx16 ET40 142 5.59 15.4 34.0 2.0 29
255/65R17 108T 7Jx17 ET40 142 5.59 15.9 35.2 2.2 32
265/55R18 105H 8Jx18 ET30 144 5.67 15.2 33.6 2.4 35

Kemas kini halaman: Feb. 18, 2021, 1:26 p.m.
Glosari Tayar
Istilah tayar yang anda boleh lihat di halaman ini

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.