Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.

Nyatakan jenis, tahun dan model untuk mencari roda yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
±
±

2016 Hyundai IONIQ Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan Hyundai IONIQ 2016

Hyundai
Sila pilih pengubahsuaian kenderaan Hyundai IONIQ 2016 di bawah dan lihat jadual untuk mendapatkan saiz roda, saiz tayar, corak bolt (PCD), ofset rim dan parameter kepadanan tayar yang lain. Jika perlu, anda boleh menapisnya mengikut kawasan pengedaran jualan.

Hyundai IONIQ AE [2016 .. 2020]

Generasi
Tapis mengikut kawasan:
Eropah EUDM
Korea Selatan SKDM

2016 Hyundai IONIQ AE [2016 .. 2020] - Pengubahsuaian

Hyundai IONIQ AE [2016 .. 2020] 1.6 GDi

139 hp
EUDM SKDM
  • Generasi: AE [2016 .. 2020]
  • Pengeluaran: [2016 .. 2020]
  • Kawasan jualan: Eropah, Korea Selatan
  • Kuasa: 139 hp | 104 kW | 141 PS
  • Enjin: 1.6 L, , Hybrid
  • Tahap Trim: Electronic Parking Brake (EPB)
  • Gerek Tengah / Geret Pusat:
  • Corak Bolt (PCD): ()
  • Pengikat Roda: Kacang lug
  • Saiz Bebenang:
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 205/55R16 91H 6.5Jx16 ET50 48 - 52 145 5.71 9.1 20.0 2.5 36
OE 225/45R17 91V 7Jx17 ET53 51 - 55 155 6.10 9.7 21.5 2.5 36
205/50R17 89H 6.5Jx17 ET50 145 5.71 9.0 19.9 2.5 36
205/50R17 89H 7Jx17 ET53 155 6.10 9.0 19.9 2.5 36

Hyundai IONIQ AE [2016 .. 2020] 1.6 GDi

139 hp
EUDM SKDM
  • Generasi: AE [2016 .. 2020]
  • Pengeluaran: [2016 .. 2020]
  • Kawasan jualan: Eropah, Korea Selatan
  • Kuasa: 139 hp | 104 kW | 141 PS
  • Enjin: 1.6 L, , Hybrid
  • Gerek Tengah / Geret Pusat:
  • Corak Bolt (PCD): ()
  • Pengikat Roda: Kacang lug
  • Saiz Bebenang:
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 195/65R15 91T 6Jx15 ET46 44 - 48 135 5.31 8.9 19.6 2.5 36
205/55R16 91H 6.5Jx16 ET50 48 - 52 145 5.71 9.1 20.0 2.5 36
205/50R17 89H 6.5Jx17 ET50 145 5.71 9.0 19.9 2.5 36
225/45R17 91V 7Jx17 ET53 51 - 55 155 6.10 9.7 21.5 2.5 36

Hyundai IONIQ AE [2016 .. 2020] EV

118 hp
EUDM SKDM
  • Generasi: AE [2016 .. 2020]
  • Pengeluaran: [2016 .. 2020]
  • Kawasan jualan: Eropah, Korea Selatan
  • Kuasa: 118 hp | 88 kW | 120 PS
  • Enjin: Electric
  • Tahap Trim: Trend, Style, Premium, Premium SE
  • Gerek Tengah / Geret Pusat:
  • Corak Bolt (PCD): ()
  • Pengikat Roda: Kacang lug
  • Saiz Bebenang:
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 91H 48 - 52 145 5.71 9.1 20.0 2.5 36
89H 145 5.71 9.0 19.9 2.5 36
89H 155 6.10 9.0 19.9 2.5 36
91V 51 - 55 155 6.10 9.7 21.5 2.5 36

Lihat maklumat kepadanan roda Hyundai IONIQ untuk tahun model lain:
2023 2022 2021 2020 2019 2018 2017 2016
Kemas kini halaman: 07/01/2023 16:20
Glosari Tayar
Istilah tayar yang anda boleh lihat di halaman ini

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed