Cari Bentuk untuk model kenderaa, saiz tayar atau rim Pilih tab di bawah untuk memperoleh data kepadanan untuk kenderaan anda atau mencari kenderaan yang padan dengan kriteria anda.

Nyatakan jenis, tahun dan model untuk mencari roda yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:
Nyatakan nilai di medan di bawah untuk mencari kenderaan yang sepadan:

2022 Cupra Ateca Panduan kepadanan tayar Ketahui apakah jenis roda dan tayar yang padan dengan Cupra Ateca 2022

Sila pilih pengubahsuaian kenderaan Cupra Ateca 2022 di bawah dan lihat jadual untuk mendapatkan saiz roda, saiz tayar, corak bolt (PCD), ofset rim dan parameter kepadanan tayar yang lain. Jika perlu, anda boleh menapisnya mengikut kawasan pengedaran jualan.

Cupra Ateca KH7 Facelift [2020 .. 2024]

Tapis mengikut kawasan:
Oceania AUDM
Eropah EUDM
Timur Tengah MEDM
Mexico MXNDM
Malaysia (Asia Tenggara) SAM

2022 Cupra Ateca KH7 Facelift [2020 .. 2024] - Pengubahsuaian

Cupra Ateca KH7 Facelift [2020 .. 2024] 2.0 TSI 4Drive

296 hp
  • Generasi: KH7 Facelift [2020 .. 2024]
  • Pengeluaran: [2020 .. 2023]
  • Kawasan jualan: Mexico, Eropah, Malaysia (Asia Tenggara), Timur Tengah, Oceania
  • Kuasa: 296 hp | 221 kW | 300 PS
  • Enjin: 2.0 L, , Petrol
  • Gerek Tengah / Geret Pusat:
  • Corak Bolt (PCD):
  • Pengikat Roda: Bolt Roda
  • Saiz Bebenang:
  • Pengetatan Tork Roda:
Tayar   Rim   Julat Ofset mm Undur Ruang mm inci Berat Tayar kg lb Tekanan Tayar (depan / belakang) bar psi
OE 245/40R19 94W 8Jx19 ET45 43 - 47 159 6.26 11.4 25.0 2.4 35
245/35ZR20 95Y 8Jx20 ET40 38 - 42 154 6.06 10.9 24.0

Lihat maklumat kepadanan roda Cupra Ateca untuk tahun model lain:
2023 2022 2021 2020 2019 2018
Kemas kini halaman: Nov. 23, 2022, 9 a.m.
Glosari Tayar
Istilah tayar yang anda boleh lihat di halaman ini

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.